Since 1997 spare parts for handling
CHAIN MAINTENANCE
Download our catalogs to get all the information you needor call us on 011 770 1341 to get our support
transmission
light transmission
.png)
heavy transmission
.png)
liftting chain
profiles and raceways
.png)
Catene per carrelli elevatori
ISO / ASA STANDARD CHAINS
PRE-LUBRICATION WITH WAX
The wax allows to limit friction and allows much longer relubrication intervals than a classic lubricant.
So it gets resistance
considerably greater wear.
PREFORMED BICONIC BUSHES
Unlike the non-preformed bushings they undergo
a "barrel" type deformation, the work surface
of the preformed bushes is increased by one
uniform distribution of mechanical stresses. This increases
noticeably resistance.
BLASTING
Thanks to the heat treatments and shot peening performed on the plates, the tensile strength is about 20% HIGHER THAN ISO STANDARDS.
ANTI-WEAR DELTA ®
Treatment
The Thermo-Chemical Treatment confers a remarkable resistance to abrasion and oxidation, thanks to the considerably higher surface hardness.
Coeficient of friction
The friction coefficient is lower than that of all other joints (cemented, carbonitrided, ...). The hardness and chemical properties of the joints allow to move the seizure point
Thanks to superior hardness, a low coefficient of friction and compatible chemical affinities, our chains have a longer life than standard chains, especially in severe applications (abrasion, impact, difficult lubrication).
These particular properties allow DELTA® HR chains to transmit higher powers.
STAINLESS STEEL CHAINS
These chains are designed for operation in the food environment or, in the presence of aggressive chemical environments
Pins and plates in 300 series stainless steel with high hardness treatment
Bushes machined from solid in stainless steel series 300
Extruded stainless steel rollers series
Pre-lubrication with NSF H1 food oil or other lubrication on request
Presence of a minimum of 10.5% chromium
ANTICORROSION DELTA TITANIUM ®
For the most demanding applications and in particular when an important tensile strength is required, this treatment is the most suitable.
It benefits from the DELTA® treatment mentioned above and a GEOMET treatment against corrosion.
GEOMET is a coating consisting of Zinc and Aluminum flakes, 100% Chromium VI free.
Offers significantly better corrosion resistance. In fact, red rust appears only after 450 hours compared to 100 hours of a dichromate galvanizing treatment.
WITHOUT LUBRICATION
This chain allows you to:
• avoid lubrication when it is difficult or even impossible for various reasons
• avoid oil splashes that cause contamination of the transported products
• operate in a humid environment
• decrease the risk of lubrication oil pollution,
• reduce the overall cost of maintenance.
The concept of non-lubrication is based on the use of sintered bushings.
The pin undergoes a surface hardening treatment, the rollers are solid and all components are nickel plated for corrosion protection.
WITHOUT LUBRICATION
Delta Verte®
It is based on the use of self-lubricated composite material bushings together with the DELTA® pin and other components treated with geomet
Use temperature -30 ° C / + 80 ° C
WARNING! They cannot work in contact with stainless steel pinions and guides.
Consult us for use
CHAINS FOR HEAVY TRANSPORT
Chains suitable for heavy transport according to M-BS-FV standards
Solid pin chains
Chains with hollow pins
Standard and custom attachments
Scraping chains
Perforated plates
Offset plates
Galle chains
Rotary chains
Arisen chains
Timber transport chains and paper industry
Special chains in the catalog and on drawing
OUR SERVICE
CHAINS SERVICE
Chains available cut to size
Standard chains available in stock
TECHNICAL SUPPORT
A person dedicated to you will support you to select the best spare part based on the application
FLEXIBILITY
We will listen to your needs and we will meet you as much as possible
QUALITY
All our products are of European origin, certified and of high quality, to provide long-lasting spare parts
SPEED
Estimates and responses in a short time.
Our deliveries respect the confirmation dates
LOYAL CUSTOMERS
For our loyal customers we keep components and spare parts in stock to manage emergencies
CONTACTS
ADDRESS
VIA CHAMBERY 93 / 107V
TURIN, TO 10142
TEL. 011 770 1341
VAT number 07399380018
OPENING TIME
MONDAY - FRIDAY 8:30 - 17:30